11' Fishing SUP

Try out the new Heavy-Duty 35" Extra Wide 11’ Saturn Inflatable Military Grade SUP Paddle Board and you'll be amazed at the stability and bouyancy. This is a custom design specifically tailored for individuals looking to get more out of their SUP than a short excursion. The upgraded features including extra thick material, increased width, 6" thick floor, and exterior grommet strip make this SUP among the most versatile in the industry. Perfect for fishing or carrying additional gear as shown in the photo to the right. Please note the cooler and fishing gear shown are not included with the SUP.

The 35" width provides much greater stability over nearly all other inflatable SUP boards on flatwater or whitewater. The 6" thick customized drop-stitch floor is rated at over 15 psi which makes the bouyancy nearly 50% greater than other 4" thick inflatable SUP boards! These two features make a tremendous difference over our older models and other competitor SUP boards. This model also comes standard with our removable rear fin which helps with improved tracking and also reduces the SUP board storage size.

The Saturn 11' SUP330X has 1 large (removable) and 2 small rear fins for improved tracking and a non-skid rubber pad on top of the board for improved grip. The board also comes with a convenient carry handle. The Saturn SUP330X paddle board offers premium features along with outstanding functionality, outperforming other inflatable paddle boards on the market today.

The most custom feature of this boards is the heavy-duty grommet lines have been strategically positioned on both sides of the paddle board to facilitate the mounting of gear and harware including fishing poles, coolers, drybags, and kayak seats.

This amazing board was built with military excursions in mind and their durability is absolutely top-notch. It was built to be the strongest and most bouyant inflatable SUP on the market. The 140mm (6”) thick drop-stitch coor floor is fully covered on the top and bottom with extra 1.5mm PVC layers making the material the thickest on the market. This protects against pinhole leaks and sharp objects like fishing and diving gear. They are also protected from all sides with heavy-duty rub strake protectors.

• Perfect for all uses, from military excursions to day long fishing adventures.
• Grommets strips are custom installed on both sides for attachment of kayak seat, coolers, rod holders, etc.
• Easy to install and remove large rear fin for better tracking.
• Perfect for use as a sit on top kayak for up to 2 adults.
• Raised rocker and pointed tip prevents curling and improves performance.
• SUP330X paddle boards can be inflated up to 15psi for added stability.
• Boards perform equally well even under much lower air pressure of 8-10psi.
• Mesh backpack carry bag, Bravo 4 SUP hand pump and repair kit are included standard.
• SUP Paddles are NOT included, but are available in our Accessories section.

Midnight Black Special Forces Inflatable Paddle Boards
Installing the removable fin:
Saturn Paddle Boards FAQ Questions: How do I store my inflatable SUP when not in use? Please note, that black color inflatable SUP should not be left under direct sun light for long time, because air will expand due to the heat, reaching over recommended air pressure limits. Either release some air pressure, protect with light color cover, or store SUP in a well ventilated, shaded place. Air pressure inside board should not reach over 15psi. How do I inflate my paddle board quickly? Get an inexpensive electric pump for mattress inflation sold in local retail stores. We recommend the Coleman Rechargeable pump for about $29. Use it to inflate paddle board to about 80% quickly, and then finish pumping to high pressure with provided hand pump. How do I use the hand pump to bring inflatable paddle board to high pressure? When using the hand pump to inflate paddle board do not use only your hands and arms when the pressure gets higher. Use your body weight to push the handle of the hand pump down. Bend at the knees and lock your arms straight while putting all of your weight over the handle. How do I deflate the paddle board? Open the valve cover, press slightly on the pushpin inside the valve with your finger tip to release some air pressure, then press completely and turn the pushpin in either direction, locking it in the open position. Turn the board fins up. Start rolling the board from the rear with the fins inside the roll. You can use a rubber bungee cord to wrap around the board to keep it from unrolling. Why is air escaping from the valve as soon as the valve adaptor is disconnected? Make sure that the pushpin inside the valve is locked in the upper position before you start pumping air into the board. When the valve pushpin is in the upper position, it means that the valve is locked, and no air will escape when the valve adaptor is disengaged. How do I know when the paddle board is fully inflated? Our Saturn SUP330X can take up to 15psi. We suggest you use our high-pressure electric pump that automatically shuts off once full pressure is achieved. If you use a hand pump and the air pressure gauge is not available, you'll need to pump until you feel the board surface become as rigid as a hard plastic board. If the board is fully inflated, it will not bend under your weight when you are stand up paddling (up to 250 lbs). If you are using the Saturn board as a sit-on-top kayak, high pressure is not as important as when standing on it. Just inflate the board until it is moderately hard and does not feel soft when you press it with your fingers. How to use the provided Bravo hand pump with gauge? Make sure you read the instructions on the hand pump chamber. Apply oil to rubber seals inside pump and aluminum handle. Use double-action option to quickly fill up air chamber, then remove the white plug and use the single-action to finish inflation. Gauge will show air pressure on a down stroke only. If you want pressure gauge to show pressure readings continuously, then please remove rubber seal inside the valve adaptor. My paddleboard seems to be a little bit tipsy, why? First of all make sure the paddleboard is fully inflated to atleast 8 psi. Our military grade inflatable paddleboard can take up to 15 psi of air pressure. While it can be achieved with a regular hand pump, an electric high pressure pump is recommended for quick and complete inflation.