The new Saturn Fishing boats have been a hit and inventory is going fast. The new Triton models just arrived and the 2025 upgrades represent our largest ever upgrade package and include over $400 additional value. The Triton upgrades offered for the 12' Saturn Heavy-Duty Fishing Boat include our heavy-duty 35 OZ Suijia 1.2mm 2000 Denier PVC ($200 value and nearly 50% thicker than our Standard model), UK imported Leafield D7 inflation valves ($150 value), Leafield PRV pressure relief valve ($80 value), 2 fishing rod-holder mounts (rod holders can be purchased separately), front motor mount attached AND motor mount ($75 value), fiberglass coated marine grade plywood transom, 2000 cc capacity 7.2psi barrel pump, and an extended 3-year warranty. The boat technical specifications are nearly identical between the Triton model (TRFB365) and our standard version (FB365). These Triton series improvements incorporate the newest technologies in inflatable boat construction and provide an incredible value for those looking to put their boat to the test. If available, this option will be listed under the "Model" selection.
We're excited to announce that our new models now come equipped with an inflatable dropstitch floor, which has a remarkable stability and portability rating of over 10 psi. With this feature, you'll enjoy exceptional performance without compromising on stability or ease of use. Plus, you'll save valuable time during boat prep, as this floor reduces setup time by approximately 10 minutes. Don't miss out on the enhanced experience these models have to offer!
The 12' Saturn Triton Inflatable Fishing Boat now includes 2 custom rod holder mounts (rod holders available under our accessories section and not included) and connection attachments for a front bow motor mount (motor mount itself is sold separately in Standard model but included with Triton upgrades). This model was based on our popular FB300 boat but beefed up to provide space for more gear and passenger room. Our FB series boats were designed to take a serious beating to the top of and bottom of the exterior tubes. The tube construction is made from the same heavy-duty, commercial grade 1100 DTEX PVC common to most of our other standard Saturn boats, but on top of that we added extra wide and extra thick rub protectors on the bottom of tubes, over the keel, and on top of the boat tubes. It's like a Rhino liner for the high impact areas of your boat.
In addition, there is a 2nd layer of extra thick 1.5mm PVC glued along the bottom of the tubes, all the way up to rub strakes on side of tubes. And, whole vessel bottom is also made of extra heavy-duty 1.5mm PVC fabric. That is the most extra protection available for any inflatable 12' fishing boat on the market today!
It is well known that space inside inflatable boats is hard to come by and is almost always lacking. To address this issue we invented a new (patent pending) cargo lacing system on top of the tubes, providing more protection for getting in and out of the boat with sharp gear. This design provides an unmatched ability to store gear on the tubes rather than entirely within the confines of the boat hull.
The Saturn FB365 (and the upgraded TRFB365 model) inflatable motor boat features two grommeted PVC strips that are shifted off the center of tubes, leaving enough space to store cargo on top of the tubes. Any type of gear can be strapped down using bungee cords, ropes, tie downs or straps.
The Saturn FB365 (and the upgraded TRFB365 model) is an extra heavy-duty inflatable boat, primarily designed for fishing. We even added a motor mount attachment point to the bow to accommodate an electric trolling motor when fishing. The motor mount itself can be purchased as a separate accessory (included with Triton upgrade) and is suitable for up to a 55lbs electric trolling motor. In addition, two sockets for detachable fishing rod holders were added on top of the tubes in the bow area. We simply left no stone unturned in our quest to make the most accommodating 12' inflatable fishing boat in the industry with additional upgrades that include a heavy-duty dropstitch inflatable floor, extra protection layers all over, numerous D-rings and grommets eyelets, and reinforced carrying handles. All of these features make the Saturn FB365 inflatable fishing boat an excellent choice for fishing, hunting, work, hauling, diving, pleasure cruising or as dinghy tender for yacht or sail boat.
Specifications:
- Triton upgrades for this model (TRFB365) include; 35 OZ Suijia 1.2mm 2000 Denier PVC (nearly 50% thicker and stronger) material used in the construction of the boat hull and side tubes, Leafield inflation valves, Leafield pressure relief valve, fton motor mount to insert into the mount attachment, fiberglass coated marine grade plywood transom, upgraded hand pump and accessories, and our Triton manufacturing high-frequency heat welded construction! Double layer of PVC on the bottom of the boat doubles the thickness to nearly 80 OZ 2.7mm 4000 Denier of protection.
- 4 x D-rings in the bow area and 2 x D-rings on top of tubes in rear.
- Boat shipping size approximately 52"x30"x14"
- Heavy-duty 1100 Denier PVC for the Standard model.
- Double line of grommet lines to secure cargo on top of tubes.
- Splash guards with safety grab rope.
- Extra thick and wide rub strake protector on top of tubes.
- Extra thick and wide rub strake protector on bottom of tubes.
- Extra thick and wide rub strake protector on bottom of keel.
- Additional 1.5mm PVC layer on bottom of tubes for both Standard and Triton models.
- Bottom V-keel section of the boat made of 1.5mm PVC.
- Two mounting brackets for custom fishing rod holders (optional).
- Extra D-rings in the bow area and on top of tubes in the rear.
- Towing D-ring on bottom of tubes in a bow area.
- Front stainless steel handle with integrated D-ring for anchor rope.
- Additional holders for rowing oars inside tubes.
- Included: hand pump, repair kit, carry bag, 2 aluminum benches, anchor rope, 2 fishing rod holder mounts (rod holders not included), and rowing paddles.
- Duffel bags shown for illustration purposes only. Not included.
Installation Steps (FB-inflatable-boat-floor-installation_28ld-sf.jpg, 1,223 Kb) [Download]
info@saturnrafts.com
